.png?width=268&height=81&name=logo-new2%20(1).png "logo-new2 (1)"){kind=logo}
Telescopic Technology for vertical molding lines
Side risers have been specially designed for use on vertically partitioned molding lines.
Two product lines are distinguished. The first is the Tele-Side-Feeder-System, which is suitable for molding on the pattern plate, analogous to the classic Tele-Feeder-System for horizontal molding lines. Chemex also offers insert sleeves that can be inserted into the mold bales manually or with the help of the core inserter after the compaction process.
Benefits of the Side-Insert-Sleeve
Chemex Tele-Side-Risers are specifically designed for use in vertically partitioned molding lines. With a choice between Tele-Side-Risers and innovative Side-Insert-Sleeves, our selection of side risers offers a wide range of benefits for foundries:
-
Higher yields
-
Lower melting costs
-
Fluorine-free formulations
- Lower scrap rates
-
Minimal footprint
-
Less fettling required
-
Heated feeder neck
- Innovative telescopic technology
Our Tele-Side-Risers
-
Telescopic technology, especially for vertical molding lines.
-
Increase in realizable unit weights and plate loading.
-
Good venting via the feeder, no gas-induced casting defects.
-
Free positioning on the pattern plate
- Flourine-free formulations
.png?width=350&height=350&name=Untitled%20design%20(37).png "Brodie Biersner")
Your contact
Brodie Biersner
Senior Product Manager Feeders